Oscilloscope OWON SDS7102 Digital Storage 2-channel with VGA and LAN interface

Instrumentasi osiloskop digunakan untuk akuisisi data sinyal listrik yang dihasilkan dari perangkat elektronik tertentu. Hal ini berguna untuk analisis kinerja piranti, bahkan dapat digunakan untuk mendeteksi kerusakan berdasarkan data sinyal listrik yang ditampilkan. Dengan demikian, dapat membantu bagi para teknisi maupun desainer elektronik untuk merancang atau memperbaiki malfungsi yang terjadi.
Description:
The Owon SDS7102 is a 100 MHz bandwidth 2 channel digital storage oscilloscope with a 1 GS/s sample rate and an 8 inch color TFT-LCD screen with 800x600 resolution.  It offers huge amounts of memory, USB flash storage support, and a 3-year warranty with service provided at Saelig.  The unit contains two passive probes that are switchable between 1:1 and 10:1 input ratio. Also included are a USB cable, AC power cord, user manual, and a software CD-ROM.  All accessories have a one year warranty.  There is a battery option for operating away from 110V – great for field use!  Customers have voted with their wallets – this is one of our three most popular scopes
Features:

• 10M data points record length with high 1GS/s sample rate
• AutoScale function 
• USB and SVGA control ports 
• 8 inch TFT display (800 x 600 pixels)
• Optional high capacity lithium battery
• Attractive ergonomic thin design 
• Probes included

Model	SDS6062	SDS7102	SDS8102	SDS8202	SDS8302	SDS9302
Bandwidth	60MHz	100MHz	100MHz	200MHz	300MHz	300MHz
Sample rate(Real time)	500MS/s	1GS/s	2GS/s	2GS/s	2.5GS/s	3.2GS/s
Horizontal Scale(S/div)	5ns/div ~ 100s/div, step by 1~2~5	2ns/div~100s/div,step by 1~2~5		1ns/div~100s/div, step by 1~2~5
Rise time (at input, typical)	≤5.8ns	≤3.5ns		≤1.7ns	≤1.17ns
Channels	Dual
Display	8" color LCD,TFT display,800x600 pixels,65535 colors
Dimension	340mm×155mm×70mm
Weight	1.8kg

 

	Model		SDS6062	SDS7102	SDS8102	SDS8202	SDS8302/SDS9302
Vertical System	Vertical resolution (A/D)		8 bits Resolution (2 channels simultaneously )
	Vertical sensitivity		2mV/div~10V/div(at input)
	Displacement		±10div(5mV~10v)	±1V(2mV~100mV), ±10V(200mV~1V),±100V(2V~10V)
	Analog Bandwidth		60MHz	100MHz		200MHz	300MHz
	Single bandwidth		Full bandwidth
	low frequency		≥ 5Hz
	Rise time (at input, typical)		≤5.8ns	≤3.5ns		≤1.7ns	≤1.17ns
	DC gain accuracy		±3%
	max input voltage		400V (PK-PK) (DC + AC PK-PK)
	DC accuracy(Average)		Average 16: ±(3% rdg + 0.05 div) for  ΔV
Measurement	Cursor measurement		ΔV and  ΔT between cursors
	Automatic measurement		Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time,Fall Time, DelayA→B , DelayA→B , +Width, -Width, +Duty, -Duty
	Waveform Math		+, -, ×, / ,FFT
	Waveform storage		15 waveforms
	Lissajou’s figure	Bandwidth	Full bandwidth
		Phase difference	±3 degrees
	Communication interface		USB2.0, USB flash disk storage, Pass/Fail, SVGA, LAN
Trigger	Trigger level range		±6 divisions from screen center
	Trigger level accuracy		±0.3div
	Horizontal Trigger displacement		Pre-trigger: 655 div,Post-trigger: 10 div
	Trigger Holdoff range		100ns~10s
	Edge trigger		Rising, Falling
	Pulse Trigger	Trigger condition	Positive pulse >, <, =  negative pulse >, <, =
		Pulse width range	24ns~10s
	Video Trigger		NTSC, PAL, SECAM
	Slope Trigger	Trigger condition	Positive pulse >, <, = negative pulse >, <, =
		Time setting	24ns~10s
	Alternate Trigger		Edge, Pulse, Video, Slope
Waveform record	Waveform quantity		1~1000
	Interval time		1ms~1000s
	Display		8" color LCD,TFT display,800x600 pixels,65535 colors
	Power Supply		100~240VAC RMS, 50/60Hz, CAT II
	Power consumption		< 18W
	Dimension Weight		340mm(L)×155mm(H)×70mm(W) 1.8kg (without battery)

Contact us for more information.

• Availability: 1
• Model: SDS7102